Acopos inverter x64 manually

Read and understand this manual before installi ng or operating the ACOPOSinverter X64 drive. Any changes made to the parameter settings must be performed Acopos inverter x64 manually qualified personnel. Failure to follow these instructions will result in death or serious injury. Note: When factory settings apply and during powerupmanual reset or after a stop command, the motor can only be powered once the" forward"" reverse" and" DC injection stop" commands have been reset.

Tubular linear motor with Hall encoder on a standard ACOPOS drive. Installing this inverter directly on each stretching station enables us to produce the entire station in advance, test it and parameterize it. The advantages of Krones new series of blow molding machines are clearly evident. It comes as no small surprise, then ACOPOSinverter X64. Error ID: Media Handling Nip is unable to move FB Error Messages Troubleshooting.

Nip motor inverter driver requires initialization Hans Wimmer, Managing Director of B& R in Eggelsberg, says: " Our customers have often asked about frequency inverters, so it made sense to add this product to our portfolio. " All three frequency inverters, namely the ACOPOSinverter S44, X64 and P88, are equipped with serial, X2X and POWERLINK interfaces and fully integrated in Automation Studio. The ACOPOSinverter X64 is a frequency inverter for 3phase induction motors with a voltage supply from 200 to 500 V and power output from 0.

18 to 15 kW. The workintensive and errorprone task of manually setting parameters is no longer necessary and startup times are substantially reduced. During service, relevant data can be requested and the cause of any problems that may exist can be determined. Further configuration of the ACOPOS servo drive to meet the respective applicationspecific B& R has become an industry leader in innovation and technology through an acute intuition for market developments and trends as well as a strong desire to offer hightech solutions that benefit the customer.

B& R will continue to grow in the coming years and will further strengthen their leading position in the international market. ACOPOSinverter P84 The ACOPOSinverter P74 frequency inverter includes various drive profiles for threephase induction motors and synchronous motors with a voltage supply from 200 to 500 V and a power rating from 0. 18 to 15 kW. This helps fit the inverter perfectly into the B& R Motion concept and allows movements to be synchronized with the servo drives.

Thanks to the integrated B& R Automation Studio environment, no other software tools are needed.



Phone: (154) 507-3210 x 9781

Email: [email protected]